Celestion CF1025C 8ohm 10" 300 watt Ferrite Speaker

email: [email protected] if you can find a cheaper price for the Celestion CF1020C

The Celestion CF1025C 10” Ferrite mid/bass unit offers 3000Wrms (AES) continuous power handling and 99dB sensitivity
The CF1025C loudspeaker uses a 2.5” high temperature voice coil that efficiently dissipates heat, preventing sensitivity loss through thermal compression
Celestion have employed a M-roll surround providing progressive excursion control, yielding a smooth response even at extremes of frequency range
This PA driver has an extremely lightweight design combined with a highly efficient magnet assembly results in exceptional power-to-weight ratio
Intelligent heat management in both chassis and magnet assembly design further minimizes distortion

The Celestion CF1025C bass and mid range driver offers superb performance and premium sound quality delivered through a Ferrite magnet structure design that has excellent power handling characteristics.

Features include:
Smart use of venting and specially designed heatsink for reduced thermal compression
Effective flux management enabling increased sensitivity

note: Price includes VAT

General Specifications

Nominal diameter 254mm/10in
Power rating 300Wrms
Continuous power rating 600W
Nominal impedance 8Ω
Sensitivity 99dB
Frequency range 60-5,000Hz
Voice coil diameter 64mm/2.5in
Chassis type Cast Aluminium
Magnet type Ferrite
Magnet weight 1.7kg/60oz
Coil material Edgewound copper clad aluminium
Former material Glass fibre
Cone material Kevlar loaded paper
Surround material Cloth-sealed
Suspension Single
Xmax 2.5mm/0.1in
Gap depth 8mm/0.31in
Voice coil winding width 12.5mm/0.49in

Small Signal Parameters

D 0.21m/8.27in
Fs 54.8Hz
Mms 37.03g/1.31oz
Qms 2.338
Qes 0.299
Mmd 32.51g/1.15oz
Qts 0.265
Re 5.15Ω
Vas 38.63lt/1.36ft3
BI 14.82Tm
Cms 0.23mm/N Rms5.46kg/s
Le (at 1kHz) 0.57mH

Mounting Information

Overall diameter 265mm/10.43in
Overall depth 119mm/4.69in
Cut-out diameter 230.8mm/9.1in
Mounting slot dimensions 8x6.5mm/0.3x0.25in
Number of mounting slots 8
Mounting PCD range 244.5-247mm/9.63-9.73in
Unit weight 4.9kg/10.8lb